User's Manual

System Components
10 Eclipse
®
TensiTrak
®
Operator’s Manual
Eclipse TensiTrak Receiver
The Eclipse TensiTrak receiver monitors the pullback and mud pressure data in real time and sends the
data to the Eclipse TensiTrak remote display on the drill rig. The receiver will save approximately 30
hours worth of data or approximately five runs before transferring to a computer is required. The Eclipse
TensiTrak receiver can also be used to track the position and depth of the TensiTrak unit, and it will also
display the TensiTrak unit’s temperature and battery status.
Eclipse TensiTrak Receiver Side View (left) and Top View (right)
From this point forward in this manual, the Eclipse TensiTrak receiver will often be referred to as simply
the receiver. Any Eclipse receiver can be upgraded to have the TensiTrak capability.
Eclipse TensiTrak
Remote Display
The Eclipse TensiTrak remote display functions just
like your standard Eclipse remote display except that
it has upgraded firmware to display the pull force,
mud pressure, and maximum pull force.
Speake
r
Trigge
r
Switch
Toggle
Switch
Display
Screen
Infrared
Port
Eclipse TensiTrak Remote Display