User's Manual

Recording Data
Eclipse
®
TensiTrak
®
Operator’s Manual 25
2. Power Up Receiver & Confirm Tension and Mud Pressure Readings
1. Power up the receiver by placing a NiCad battery pack into the receiver’s battery compartment
and then clicking the trigger.
2. Select Tension from the Eclipse main menu screen.
3. Verify that you see the pull force, maximum pull force, and mud pressure listed on the screen.
4. Verify that you have the correct job number.
Receiver Display Screen
3. Power Up Remote Display & Confirm Tension, Mud Pressure Readings
1. Power up the remote display by placing a NiCad battery pack in the remote (or by plugging the
unit into a cigarette adapter) and then pressing the execute button.
2. Select the Tension option from the remote’s main menu screen.
3. Verify that you see the pull force, maximum pull force, and mud pressure listed on the screen.
Remote Display Screen
Telemetry
Channel