User's Manual

Receiver
DigiTrak
®
F5™ Operator’s Manual 19
Set Time and Calendar
The set time and calendar option on the settings menu allows you to program the time and date into your
receiver. This action is necessary when you are using the DataLog function. When you select the set time
and calendar option, the following screen will display.
Time and Calendar Keypad
Setting the Time
The time function runs on a 24-hour clock. To set the time:
1. Use the toggle to highlight the time icon so that it is the active function, as shown above, and click the
trigger.
2. Select the desired value for time one digit at a time from left to right. For example, to set the clock to
13:39 (1:39 pm):
• Toggle to highlight the “1” then click the trigger to select it.
• Toggle to highlight the “3” then click the trigger to select it.
• Toggle to highlight the “3” then click the trigger to select it.
• Toggle to highlight the “9” then click the trigger to select it.
3. Confirm that the time reads as desired.
4. Toggle to highlight the return arrow and click the trigger. The confirmation signal will sound as the
screen returns to the settings menu with the exit option highlighted.
Setting the Calendar
The calendar function displays the date by month/day/year. To set the date:
1. Use the toggle to highlight the calendar icon and click the trigger. The display window on the keypad
will change to show a date format.
2. Enter the date one digit at a time from left to right. The date format is two digits for the month, two
digits for the day, then the last two digits of the year (MM/DD/YY). For example, to set the date to
January 2, 2011 (01/02/11):
• Toggle to highlight the “0” then click the trigger to select it.
• Toggle to highlight the “1” then click the trigger to select it.
Return arrow
(shown highlighted)
Time value
(date displays here
when calendar is
active function)
Time
(shown active)
Calendar
(shown inactive)
Exit