User's Manual
Table Of Contents
- Safety Precautions and Warnings
- Dear Customer:
- Introduction
- Receiver
- General Description
- Toggle and Trigger Switches
- Audible Tones
- Installing and Removing the Battery Pack
- Power On
- Power Off
- Main Menu
- Locate Mode
- Calibration Menu
- Height-Above-Ground (HAG) Menu
- Settings Menu
- Transmitter Selection Menu
- Drill DataLog Menu
- Pressure-Tension DataLog Menu
- Using the Keypad
- Display Screens
- Standard Receiver Display Screen Symbols
- Transmitter
- Remote Display
- Battery Charger
- System Setup
- Locating
- The Target Steering Function
- Appendix A: System Specifications and Maintenance Requirements
- Appendix B: Projected Depth Versus Actual Depth and the Fore/Aft Offset
- Appendix C: Calculating Depth Based on Distance Between FLP and RLP
- Appendix D: Reference Tables
- LIMITED WARRANTY
Receiver
DigiTrak
®
F5™ Operator’s Manual 21
Transmitter Selection Menu
The transmitter selection menu allows you to specify the transmitter type, model, and frequency, when
applicable. The main transmitter selection menu appears on two different screens, as shown below
Transmitter Selection Menu, First Screen
Transmitter Selection Menu, Second Screen
If the selected transmitter type has more than one model option, as in the case of F5, F Series, Cable,
and FPT transmitters, then another screen will appear to select the specific transmitter model. If a dual-
frequency transmitter is selected, an additional screen will appear to select the desired frequency.
Once a transmitter selection is made, the display will return to the main menu with the new transmitter
selection showing at the top of the screen. Selecting exit will return the display to the previous screen with
no change to the transmitter selection. See the Transmitter section for more information on F5 transmitter
options.
Description of
highlighted option
Current transmitter
selection
Down arrow indicates
more options below
(toggle down)
F5 transmitters
(shown highlighted)
Up arrow indicates
more options above
(toggle up)
Exit
Fluid pressure
transmitters
(shown highlighted)