User's Manual
Table Of Contents
- FCC Compliance Statement
- This equipment complies with Part 15 of the Rules of the FCC. Operation is subject to the following two conditions: (1) this equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interfer...
- Table of Contents
- Safety Precautions and Warnings
- Introduction
- Power Setup
- Cable Mode
- Appendix A: System Specifications and Maintenance Requirements
- LIMITED WARRANTY
DIGITAL CONTROL INCORPORATED
21 DigiTrak
®
MFCB
™
Operator’s Manual
Appendix A:
System Specifications and
Maintenance Requirements
The power requirements and environmental requirements for the DigiTrak Multi-Function Cable Box and
remote displays are listed below.
Power Requirements
Device (Model Number) Operational Voltage Operational Current
DigiTrak Multi-Function Cable Box 12 - 28 V (nominal) 6 A max
DigiTrak MFD Remote Display
(MFD)
14.4 V
(nominal) 220 mA max
DigiTrak F Series Remote Display
(FSD)
14.4 V
(nominal) 220 mA max
DigiTrak Eclipse, F Series, and F5
Cable Transmitter (ECP, FC, F5C)
9 - 28 V
(nominal) 6 A max
DigiTrak Eclipse and F5 Steering
Tool (SST and SST5)
9 - 28 V
(nominal) 6 A max
Environmental Requirements
Device Relative Humidity Operating Temperature
DigiTrak Multi-Function Cable Box <90% -4° to 140°F (-20° to 60°C)
DigiTrak MFD Remote Display
(MFD)
<90% -4° to 140°F (-20° to 60°C)
DigiTrak F Series Remote Display
(FSD)
<90%
-4° to 140°F (-20° to 60°C)
DigiTrak Eclipse, F Series, and F5
Cable Transmitter (ECP, FC, F5C)
<100% -4° to 180°F (-20° to 82°C)
DigiTrak Eclipse and F5 Steering
Tool (SST and SST5)
<100%
-4° to 180°F (-20° to 82°C)