User's Manual
Table Of Contents
- FCC Compliance Statement
- This equipment complies with Part 15 of the Rules of the FCC. Operation is subject to the following two conditions: (1) this equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interfer...
- Table of Contents
- Safety Precautions and Warnings
- Introduction
- Power Setup
- Cable Mode
- Appendix A: System Specifications and Maintenance Requirements
- LIMITED WARRANTY
DIGITAL CONTROL INCORPORATED
6 DigiTrak
®
MFCB™ Operator’s Manual
Dear Customer:
Thank you for choosing DigiTrak
®
Locating Systems. We are proud of the
equipment that we have been designing and building in Washington State since
1990. We believe in providing a unique, high-quality product and standing behind
it with superior customer service and training.
Please take the time to read this entire manual—especially the section on safety.
Also, please fill in the product warranty registration form under the Service &
Support section of our website or fill out a paper copy and mail or fax it to us at
253-395-2800. We will put you on the Digital Control mailing list and send you
product upgrade information and our FasTrak™ newsletter.
Feel free to contact us at any of our global offices listed on the front cover if you
have any problems or questions. Our Customer Service Department is available
24 hours a day, 7 days a week to provide assistance.
As the horizontal directional drilling industry grows, we’re keeping an eye on the
future to develop equipment that will make your job faster and easier. Stay
current by visiting our web site at www.digitrak.com or by giving us a call.
We welcome questions, comments, and ideas.
Digital Control Incorporated
Kent, Washington
2009