User's Manual

Navigating Menus
29 DigiTrak
®
F5 User Guide
Height-Above-Ground (HAG) Menu
The HAG menu shows three Height Above Ground options
(Disable, Enable, and Set).
Height Above Ground (HAG) Menu
Selecting the enable HAG option will turn on the Height
Above Ground function to the value shown at the bottom of
the screen (the default value or the last value set).
Selecting the set HAG option will open the keypad for setting
an HAG value. See “Using the Keypad” at the end of this
section for more information.
When the HAG has been turned on (set or enabled), depth
readings must be taken with the receiver held at the height
above ground specified.
Selecting the disable HAG option will turn off the HAG
function. Depth readings must be taken with the receiver on
the ground.
The HAG is turned off whenever the receiver is turned off,
depth units are changed, or Target Steering is used.
Set HAG
(See Using
Keypad
Below)
Exit
Disable
HAG
Enable HAG
(Shown
Highlighted)
Highlighted
Selection
Description
with Current
HAG Setting