User's Manual

Target Steering
57 DigiTrak
®
F5 User Guide
Otherwise, toggle right to highlight the keypad and pull
the trigger. Enter the target depth using the keypad. See
“Using the Keypad” in the Navigating Menus section.
3. After a target depth is selected, the confirmation tone will
sound and you will be returned to the locate screen with
Target Steering activated. The following screen will
display.
Receiver Screen with Target Depth
Programmed
The predicted depth of the transmitter that displays is the
depth that the transmitter will be at when it reaches the
location beneath the receiver if it continues on its current
path. In this case, the predicted depth of the transmitter is
deeper than the target depth; steering is needed. See
Steering to the Target below.
Turn Off Target Steering:
To turn off Target Steering, toggle down from the Target
Steering locate mode screen and the screen will return
to the standard locate screen.
Horizontal
Distance
Between
Transmitter
and Receiver
Predicted
Depth of
Transmitter