User's Manual

DIGITALCONTROLINCORPORATED
10 DigiTrak Falcon F5
®
Operator's Manual
Receiver
I know what a trigger switch is; can I skip this? Page13
This section is like shaking hands with your Falcon for the first time. If you and your
receiver already have a solid relationship, you can probably jump ahead to Receiver
Menus.
1. Screen
2. Toggle Switch
3. Front
4. Infrared window
5. Trigger switch
6. Battery tab
7. Battery compartment
8. Serial number
Falcon F5 Receiver – Side and Back Views
Overview
The DigiTrak Falcon F5 receiver (locator) is a handheld unit used for locating and tracking a Falcon
transmitter. It converts signals from the transmitter to display depth, pitch, roll, temperature, and battery
level, plus sends this information to the remote display on the drill rig.
The receiver and transmitter must meet specific operational requirements
for different global regions. A regional designation number is located on the
receiver’s startup screen. This number must match the one stamped on the
transmitter for proper communication.
Startup Screen
Page 11
Prior to use, the receiver must be paired to and calibrated with the
transmitter.
Calibration
Page 14
Toggle and Trigger Switches
The Falcon F5 receiver has two switches for operating the system: a toggle switch located on the top of the
unit and a trigger located under the handle.
l Use the Toggle Switch to access and navigate menus.
l Use the Trigger Switch to turn on the receiver, select (click on) menu options, and change the screen
view for depth readings. Pull and release (click) once, hold briefly and release, or use in combination with
the toggle switch, depending on the desired action.