User's Manual

Receiver
14 DigiTrak
®
SE™ Operator’s Manual
From the startup screen, click the trigger to continue to the locate mode screen. When there is not a
powered-up transmitter in the area, the screen will appear as shown below. The signal search symbol will
display as the receiver searches for the transmitter's signal as shown below.
Receiver Locate Mode Screen (No Transmitter)
When a transmitter is in range, the locate mode screen provides real-time data about the transmitter’s
location, temperature, pitch, roll, and signal strength. The standard receiver display screens are dis-
cussed further under "Display Screens" later in this section. See the Locating section for detailed instruc-
tions on locating with the SE system.
The locate mode screen is the default receiver screen. If the receiver does not sense any trigger action
for a period of time, then the display returns to the locate mode screen.
Turning Off the Receiver
To turn off the unit, click the trigger twice to highlight the power icon in the main menu. Then hold the
trigger in for at least 1 full second. You will hear four long tones as the unit turns off.
Automatic Shutdown
The SE receiver will shut down if no trigger action and no transmitter signal are detected for 15 minutes.
Signal Strength Will
Vary with Background
Interference Signal
Signal Search
Symbol