User's Manual
Receiver
16 DigiTrak
®
SE™ Operator’s Manual
Receiver Main Menu Screen
The main menu screen also displays the receiver battery status and the current telemetry channel selec-
tion (channel 2 is shown in the example above). If the remote steering menu has been programmed with
a reference depth, you will see that number below the icon, as shown in the figure above. If the main
menu is accessed by accident, you can click through all the options to return to the locate mode screen or
wait 5 seconds for the menu to time out and return to the locate mode screen.
The table below shows the options available on the main menu and provides a brief description of each.
These options are described more fully in the following discussion. To access a menu option, hold the
trigger in with the option highlighted.
Receiver Main Menu Options
Height-Above-Ground (HAG) Menu –Turns on, turns off, or sets the height at
which the receiver will be held during depth readings. See the “Height-Above-
Ground (HAG) Menu” below.
Power Off – Turns the unit off accompanied by four long tones.
Telemetry Channel Menu – Changes the telemetry setting (channels 1 through 4)
or turns off the telemetry (channel 0). The receiver must be set to the same
channel as the remote. See the “Telemetry Channel Menu” below.
Calibration Menu – Calibrates the receiver to the transmitter using the above-
ground (1-point) method or the below-ground (2-point) method. See the
“Calibration Menu” below.
Units & Roll Offset Menu – Changes the depth and pitch units and activates the
roll offset function, which is used when the transmitter's roll position must be
compensated to match the drill head's roll position. See the “Units & Roll Offset
Menu” below.
Remote Steering Menu – Sets the reference depth, turns on remote steering, or
returns the display to standard locate mode. See the “Remote Steering Menu”
below.
Receiver Battery Status
(Shown 80% Full)
Telemetry Channel Menu
(Channel 2 Selected)
Units & Roll Offset Menu
Remote Steering Menu
Height-Above-Ground
(HAG) Menu
Power Off
Calibration Menu
Box around item
indicates it is high-
lighted for selection.
Programmed
Reference Depth