User's Manual

Receiver
28 DigiTrak
®
SE™ Operator’s Manual
Remote Steering Menu
The remote steering function allows you to place the SE receiver in front of the drill head to use as a
left/right steering target. See the Remote Steering section for detailed information on determining where
to place the receiver and how to steer to it. This section gives instructions for using the remote steering
menu.
The remote steering function is turned on by programming a reference depth. A correct reference depth
ensures proper sensitivity for the left/right steering instruction on the remote display. Select a reference
depth that matches your current drilling depth.
The first screen of the remote steering menu turns on remote steering to the reference depth displayed:
either the default value (2 ft or 0.50 m) or the value that was most recently set. The second screen turns
off the remote steering function and returns you to the standard locate mode screen. The third screen
allows you set a reference depth for appropriate left/right steering sensitivity.
Turn On Remote Steering
The turn on remote steering screen displays the current or default reference depth.
Turn On Remote Steering Screen
Hold the trigger in to turn on the remote steering function and set the target depth to the displayed value.
A checkmark will appear next to the receiver icon and you will hear the confirmation signal.
Click the trigger to advance to the turn off remote steering screen.
Bull's eye
represents
reference depth
programmed.
Programmed
Reference
Depth