User's Manual

Receiver

32 DigiTrak

SE™ Operator’s Manual

When the roll offset function is used (an electronic compensation to match the

transmitter’s 12 o’clock position to the drill head’s 12 o’clock position), the roll

indicator will have a hollow dot and the letters RO for roll offset at the bottom right,

as shown here. For more information on the roll offset, see "Units & Roll Offset

Menu" above.

The roll/pitch update meter displays the quantity of roll/pitch data being received

from the transmitter. When the meter is empty, no roll/pitch data is being received, and all information will

disappear on both the receiver and remote display. Depth and predicted depth readings may still be

taken, but the receiver will assume the transmitter has a pitch of zero, as indicated by the following image

appearing on the depth or predicted depth mode screen.

Pitch Assumed Zero

Depth Mode Screen

From the locate mode screen, hold in the trigger to access the depth mode screen. This screen shows

the battery status of the transmitter. It also provides a depth reading and other data about the position of

the transmitter with respect to the receiver.

Receiver Depth Mode Screen at LL with HAG on (Trigger In)

Approximate

Locate Point

(FLP or RLP)

HAG Setting

Line-in-the-box at

Locate Line (LL)

Depth of

Transmitter

Battery Status