User's Manual

Remote Steering
DigiTrak
®
SE™ Operator’s Manual 63
Mark IV/V Remote Steering Display
Steering Indicator
(Flashing Triangle)
Represents Transmitter
Target
Represents
Receiver
Steering
Indicator
Represents
Transmitter
Crosshair
Represents
Receiver
Steering
Indicator
Represents
Transmitter
Arrows
Represent
Receiver
Steering to the Target
Use the remote steering indicator on the remote display to steer the drill head left or right. The drill is on
track to reach the location below the receiver when the left/right steering indicator representing the
transmitter is centered on the part of the display that represents the receiver. If the indicator drifts to the
left, as shown below, then steer to the right. If the indicator drifts to the right, steer to the left. Be sure to
keep an eye on the transmitter’s pitch for up/down drill deflections.
NOTE: If the receiver does not have a reference depth programmed, the steering indicator will be
positioned at the right on Mark Series remotes.
MFD/FSD Remote Steering Display
Mark II/III Remote Steering Display