User's Manual

DIGITAL CONTROL INCORPORATED
12 DigiTrak Falcon
™
F5

Operator’s Manual
Can I change the screen brightness?
No. The display is pre-tuned for optimal contrast and visibility in all conditions.
Using the Keypad
Use the keypad for setting the height-above-ground (HAG) value, a target depth for Target
Steering, date and time, and for programming rod lengths and survey points in the DataLog
function.
Standard Keypad
To input a value, toggle to and select the desired digits from left to right. When a decimal
value is required (such as for feet only or meters), then the last two digits entered will be to
the right of the decimal point. To enter a whole value, enter two zeros at the end of the value.
Use backspace to delete the last digit entered. Once the desired number is in the display
window, select Enter to lock in the value and turn on the function.
Your Remote Display
The Falcon F5 receiver is compatible with the following remote displays:
Remote Display
Minimum Software
Version
Select on Remote
Display
Falcon Compact Display - FCD
all
Falcon F5
Multi-Function Display - MFD
3.0, F5 compatible
F5
F Series Display - FSD
all
F5
Aurora - AP8, AF8, AF10
all
Falcon F5 or F5
A remote display that accompanied your Falcon F5 receiver will already be set to
communicate with your receiver.
Enter
Display window
Backspace