User's Manual

DIGITAL CONTROL INCORPORATED

18 DigiTrak Falcon

™



Operator’s Manual

receiver briefly displays this icon:

This simply means that one band has been calibrated, but one has not. After checking AGR

for the current band, remember to calibrate and check the AGR of the other band.

Why do I keep getting calibration errors?

Carefully review the items under "Do not calibrate if" at the beginning of this section. Try

calibrating in a different location. Make sure the transmitter is on and paired (data

showing on the Locate screen). Check your batteries. If you're still having trouble, give us

a call, we'll get you going.

Note If depth data does not display, hold the trigger while over the transmitter to

display the locate line. For additional information on obtaining this

reference lock (“R”), see step 4 in the discussion under Finding the Front

Locate Point (FLP) beginning on page 50.

In-Ground Calibration

This calibration procedure is rarely needed. If you find it necessary to calibrate with the

transmitter in the ground, contact DCI customer service for information on this option, and

perform this procedure with caution.

If you just completed AGR after calibration, don't forget to turn

Height-Above-Ground (HAG) back on, if necessary.

HAG

Page 21