Thank you for your selection of our TFT-LCD Monitor. Please take a few minutes to read this User’s manual for the best performance of this monitor. Information in this manual is subject to change without prior notice. IBM, DOS, PC and VGA are trademarks of International Business Machines Corporation. CONTENTS 1. Package contents 5 2. Monitor Parts 6 3. Connecting to PC 7 4. Features 8 5. OSD Control 9 - PC Mode 10 - AV Mode 15 6. Remote Control 19 7. Dimensions 20 8.
2. Monitor Parts 3. Connecting to PC To attach the TFT-LCD monitor to the system, please follow the instructions hereunder FRONT 1. Connect 15-Pin D-SUB cable to the computer system. Tighten all the screws. 2. Connect 15-pin D-SUB cable to the appropriate connector on the back of the monitor 3. Connect DC power adapter cable to the power input connector on the back of 4 5 the monitor 4. Connect one end of the AC power cord to the DC power adapter and the other end to the AC power outlet 3 1 5.
. Features 5. OSD Control ■ Wider and clearer than you have ever imagined.
■ ADVANCED PC Mode ■ PICTURE ● Sharpness Adjust the clarity and focus of the screen image Sharp 1->2->3->4->5 Soft ● ● Brightness Controls the brightness of the LCD ● Contrast crt : show gamma pattern of CRT monitor type ● Controls the contrast of the LCD ● ● Gamma linear : show gamma pattern of LCD monitor type Color Temperature H Position provides four preset color adjustments Controls the Horizontal image position Warm 5000 -> 7300 -> 9300 Cool V Position user : user can adjust each of
● ■ OPTIONS Size Select the size of pip ● Pos Select the position of pip ● Source Select the source of video signal ● Only when the pip mode is “0n”, you can adjust brightness, contract, color, tint and sharpness ■ Adv pip ● OSD Provides nine preset OSD positions Each position is fixed at the factory ● OSD H/V pos Controls the position of OSD ● OSD timeout You can select the time up to 60 seconds ● OSD background Controls the color of OSD background Opaque (gray), Translucent (transparent)
● Auto adjust AV Mode Automatically adjust the screen to the best conditions ● Source You can select a source (RGB, Composite Video, S-Video) ● ■ PICTURE Factory reset Allows you to reset all the OSD control settings back to the factory settings ● Language Select language by using UP or DOWN button ● Freeze frame Pause the image by selecting “on” ● Brightness Controls the brightness of the LCD ● Contrast Controls the contrast of the LCD ● Color ● Tint Adjusts the depth of the video color
■ ADVANCED ● Video format Set the current video format ● Video type Set the current video type DVD -> VCR ■ OPTIONS ● Sharpness Adjust the clarity and focus of the screen image Sharp 1 -> 2 -> 3 -> 4 -> 5 Soft ● Gamma linear : show gamma pattern of LCD monitor type crt : show gamma pattern of CRT monitor type ● Color Temperature provides four preset color adjustments ● OSD Warm 5000 -> 7300 -> 9300 Cool Provides nine preset OSD positions user : user can adjust each of R,G,B Each position is
■ UTILITIES 6.
7. Dimensions 8. Specifications 351mm 288mm MODEL DCM-152W PANEL TYPE Amorphous active matrix TFT-LCD Active area 15.21” WIDE diagonal Pixel format 1152(H) x 768(V) Pixel pitch 0.279mm x 0.279mm Color depth 6bit, 262144 Colors (16M colors by dithering) 351mm 263.5mm 375mm 285mm 263.5mm 374.8mm Contrast ratio 250 : 1(Typ.) Brightness 150 cd/m2 Active display size 321.41 mm (H)x214.
9. Recommended Use 10. Troubleshooting FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN No image on the screen SETTING UP AND USING THE TFT-LCD MONITOR. ■ The VGA cable should be completely connected to the monitor and computer. ■ The display card should be completely seated in its slot. ■ DO NOT OPEN THE MONITOR. ■ Power switch and computer power switch should be in the ON position. Opening or removing covers may expose you to dangerous shock hazards or other risks.
Display is not sized properly ■ Use OSD horizontal controls to increase or decrease the size. ■ Check to make sure that a supported mode and signal timing has been selected on the display card or system being used.