User's Manual

3-1
5) Volume Control
Increase/decrease volume by pressing button ( + / - ) on the remote control.
Press button ( + / - ) on the TV set to control the volume.
4) Move to Previous Channel
Every time pressing the button on the remote
control, it moves to a previous channel.
6) Mute
Press button on the remote control to sound
off temporarily.
Press it again to turn the sound back on or press
volume buttons.
7) Checking the present broadcasting information
Press button on the remote control to
display the information on the screen.
Press it again to remove the information except input
source automatically.
Press it again to remove all information.
ON SCREEN
MUTE
PRE
VOL
VOL
27
Watching TV
1) Precautions in the initial installation
Check whether TV antenna cable is properly connected.
After checking whether the voltage is 100V or 220V, supply the electric power and
connect the adaptor to the TV.
At the moment, TV is in standby.
2) Turning on TV
Turn on the button directly on the set or by remote control.
Each pressing the button turns on or off the set.
3) Channel Selection
Press button ( ) on the remote control to change channels.
Press numeric buttons (0~9) to go to a channel directly.
Press buttons ( ) on the TV set to increase or decrease TV channels.
CH
CH
POWER
26
20 WIDE TFT-LCD TV
Power Button on Remote Control Power Button on the TV Set
Channel button on the remote control Channel button on the TV set
Previous Channel Button
MUTE button on the
remote control
Volume Button on the remote control Volume Button on the TV Set
Broadcasting Info Button