User's Manual

5-1 5-2
Setting Picture
In case it is not optimally set even though automatically adjusting it, use Picture menu
as below.
- Brightness : Adjust screen brightness
- Contrast : Adjust screen contrast
- Phase : In case it is not optimally set even though automatically adjusting it, use
Phase function.
- H. Size : Adjust the Size of the PC Monitor.
- H. Position : Adjust the position of the PC Monitor.
- V. Position : Adjust the position of the PC Monitor.
- Auto Adjustment : In case of using it as a PC monitor, it is automatically set.
43
Auto Adjustment
In case of using it as a PC monitor, it is automatically set.
When the set is connected to a PC, the MODE should be set as PC RGB Mode.
- Press button on the remote control to automatically set the
product’s screen status.
- When it is used as PC monitor
Optimal Resolution : 1280 x 768 @ 60Hz
- It may not normally display picture in any resolution out of the optimal resolution range.
- Even though it is automatically adjusted, it may not normally display picture depending
on signals from a PC and in this case, it is recommended to execute Auto Adjustment
for several times.
- Also, it can be set in OSD menu if JOG button is used.
AUTO
42
20 WIDE TFT-LCD TV