User’s Manual LASMA P PLASMA D ISPL AY M o n it o r PL DISP LAY Monitor MODEL : DPD-4200AK It’s the creative world of plasma display
WARNING RISK OF ELECTRICAL SHOCK, DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to persons.
Manual Contents Manual Contents Manual Contents 3 Features and Package Contents - Features 4 - Packages Contents 4 I/O Definitions 5 Front and Rear Controls - Front 6 - Rear Controls 6 - Remote Control Basic 7 - Remote Control Details 8 - AV Input/Ouput Terminal 10 - TV 10 - Video 10 - S-VHS 11 - SCART 11 - Monitor Out Connection 12 - Component Video 12 - PC 13 - External Speaker & Headphone Connection 13 - Auto Channel Memory 14 - Manual Channel Memory 15 - Picture Ad
Features and Package Features - 42" Diagonal Viewing Area - Menu driven On Screen Display (OSD) for Brightness and Contrast, Sharpness, Hue and Saturation , NTSC/PAL, Channel, PIP(Picture in Picture), Aspect Ratio, Input Source, Audio, Audio Adjust, Language, Color Temperature - Cable TV ready - IR Remote control for all functions - Built-in Television Tuner - Zoom Feature (up to 500%) - Freeze Picture Feature - Rotate Picture Feature - Headphone output (only sub sound) - Speaker output : Left, Right, Cente
I/O Definitions Front Panel Controls - Main Power ON/OFF - Power ON/OFF - Channel UP - Channel DOWN - Volume UP - Volume DOWN - AV Rear Unit I/O's - AC Power Input - F-Type (NTSC) or Din-Type (PAL) Connector for Antenna Input - Monitor Composite Video Output - Monitor Line Level Audio Output - S-VHS Input - Composite Video Input (2) - Line Level Audio Input (2) - SCART Input/Output - DVD Component Video Input - DVD Line Level Audio Input - PC D-sub Connector Input - PC Headphone Audio Input - Headphone Aud
Front and Rear Controls Front AV CH Down/Up Vol Down/Up Power /Main Power LED / Remote Control Receiver Rear Controls AV Input/Output Terminal The recessed AV input/output terminals allow the user to have the option of using the mounting stand or wall mounting the 42" Plasma Television. The television itself is only 95mm wide.
Remote Control Remote Control Basic POWER AV Buttons Pressing this button ( PC / VIDEO1 / VIDEO2 / turns the television VIDEO3 / TV ) ON and OFF. Use this button for signal selection. CH/VOL BUTTONS These buttons are used to adjust the channel selected and the volume Number Buttons level. Used to enter channels selected. Menu Button The center button is used to pull up the menu screen. The surrounding buttons are used to make adjustments to the menu item selected. (ex.
Remote Control Remote Control Details STILL Pressing this button will stop/freeze the picture. SLEEP This button allows the user to set the sleep timer. RECALL This button will allow the user to view the setting status. STEREO Allows MONO, STEREO or MUTE SAP mode selection. This button mutes the televisions ZOOM Pressing the up and down buttons allows the user to zoom in or out the picture.
Remote Control PIP ON/OFF Pressing this button toggles picture in picture on and off. SWAP CH ▲/▼ This button allows the Pressing this button up user to swap the picture in or down allows channel picture for picture on the selection of the picture main screen. in picture. POS PIP AV This button switches the This button switches screen location of the the mode selection of picture in picture viewing the picture in picture screen. There are four viewing screen.
Basic Operation 1. AV Input/Output Terminal 2. TV 1. Connect as the shown drawing. 2. Power on. 3. Press the [TV] button. 3. VIDEO 1. Connect as the shown drawing. 2. Power on. 3. Press the [VIDEO1] or [VIDEO2] button.
Basic Operation 4. S-VHS 1. Connect as the shown drawing. 2. Power on. 3. Press the [VIDEO1] button. Audio input must be connected with [Video1]. In the case when all input sources of S-VHS and Video1 Port are occupied, S-VHS input Sources display preceding to Video1 Port. 5. SCART Connection 1. Connect as the shown drawing. 2. Power on. 3. Press the [VIDEO2] button.
Basic Operation 6. MONITOR OUT Connection Monitor out is only applied to [TV], [VIDEO1], [VIDEO2]. 7. COMPONENT Video (ex. DVD, DTV Set-top Box) 1. Connect as the shown drawing. 2. Power on. 3. Press the [VIDEO3] button.
Basic Operation 8. PC 1. Connect as the shown drawing. 2. Power on. 3. Press the [PC] button. 9. External Speaker & Headphone Connection 1. Power Off. 2. Connect as the shown drawing. 3. Power on. 4. Adjusting Audio setting. Headphone outputs Sub-Signal Sounds.
TV Channel Memory Auto Channel Memory Follow these steps for setting the Channel Memory automatically: c Press the [MENU] button. d Select [Channel] by the [ ]/[ ] buttons. e Select [Status] by pressing the [NEXT] button. f Select TV signal input mode by pressing the [ADJUST] button. g Select [Auto Channel] by pressing the [NEXT] button. h Select [ON] by pressing the [ADJUST] buttons. i Press the [MENU] button to stop the auto channel memory. ※ Highlighted choice will be in green.
TV Channel Memory Manual Channel Memory Follow these steps to manually set the Channel Memory : c Select the channel by pressing the number button(s). d Press the [MENU] button. e Select [Channel] by the [ ]/[ ] buttons. f Select [Fine Tuning] mode by using the [NEXT] button. g Press the [ADJUST] button for the tuning adjustment. h Select [Memory] by using the [NEXT] button. i Select [Erase] or [Add] by pressing the [ADJUST] buttons. j Press the [MENU] button to exit the Channel Memory setting.
Picture Picture Adjustment Follow these steps to adjust the picture : c Press the [MENU] button. d Select the desired Mode by using the [ ]/[ ] buttons. e Move to the desired Mode by pressing the [NEXT] button. f Press the [ADJUST] button for adjusting the picture g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green.
Picture Picture Size Adjustment Follow these steps to adjust the picture size : c Press the [MENU] button. d Select the Aspect Ratio by using the [ ]/[ ] buttons. e Move to the desired Mode by pressing the [NEXT] button. f Press the [ADJUST] button to adjust the picture size ratio. g Press the [MENU] button to exit Picture Size Adjustment. ※ Highlighted choice will be in green.
Picture Picture Adjustment in PC Mode Follow these steps to adjust the picture in PC Mode : c Press the [MENU] button. d Select the desired Mode by using the [ ]/[ ] buttons. e Move to the desired Mode by pressing the [NEXT] button. f Press the [ADJUST] button for adjusting the picture in PC Mode g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green.
Picture Picture Size Adjustment in PC Mode Follow these steps for setting the Picture Size Adjustment of PC Mode. c Press the [MENU] button. d Select the Normal Scaling Modes by using the [ ]/[ ] uttons. e Move to the desired mode by pressing the [NEXT] button. f Press the [ADJUST] button to select the proper mode. g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green.
Audio Audio Mode Setting Follow these steps for setting Sound Mode : c Press the [MENU] button. d Select the Audio by using the [ ]/[ ] buttons. e Move to the desired Mode by pressing the [NEXT] button. f Press the [ADJUST] button to make the adjustment for Sound g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green.
Audio Audio Adjustment Follow these steps to adjust the Sound : c Press the MENU button. d Select the Audio Adjust by using the [ ]/[ ] buttons. e Move to the desired Mode by pressing the [NEXT] button. f Press the [ADJUST] button to make the adjustment for Sound g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green. BASS : Changes the level of low frequency sound.
Picture in Picture Picture in Picture Mode Setting Follow these steps below to set Picture in Picture mode : c Press the [MENU] button. d Select Picture in Picture by using the [ ]/[ ] button. e Select PIP size mode by pressing the [NEXT] button. f Move to desired mode by pressing the [ADJUST] button. g Select PIP Source Mode by pressing the [NEXT] button. h Select PIP Source by pressing the ADJUST button. i Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green.
Picture in Picture Watching Picture in Picture Press the [PIP ON/OFF] button. Watching PIP Press the [PIP AV] button. Changing the Sub Picture to AV Press the [▲ CH ▼] button. Changing the Sub Picture Channel Press the [POS] button. Changing the Sub Picture Position Press the [SWAP] button. PIP at PC Mode PC signal can be seen on the main picture but not on the sub Swapping Main for picture. AT 800×600 mode, you Sub picture can optimize PIP.
Video Signal Format Video Signal Format Setting Follow these steps for setting the Video Signal Format. c Press the [MENU] button. d Select the Video Mode by using the [ ]/[ ] buttons. e Move to the desired system by pressing the [NEXT] button. f Press the [ADJUST] button to select the desired system. g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green. Auto : The video signals are automatically detected and the format is set accordingly.
Color Temperature Color Temperature Setting Follow these steps for setting the Color Temperature. c Press the [MENU] button. d Select the Color Temperature by using the [ ]/[ ] buttons. e Move to the desired mode by pressing the [NEXT] button. f Press the [ADJUST] button to select the desired mode. g Press the [MENU] button to exit the adjustment menu. ※ Highlighted choice will be in green. Color Temperature : The higher temperature the coolest image looks like.
Specifications Power Source AC100V~240V, 50/60㎐ Power Consumption < 350W (Typical) Display Panel Screen Size 921 mm (H) × 518 mm (V) Number of Pixels 853(Horizontal) × 480 (Vertical) Brightness 550 cd/m2 Contrast Ratio 700:1 Displayable Colors 16,770,000 Colors Viewing Angle Over 160 degrees Input Signal TV, Video, S-VHS, Component, PC RF Input System NTSC(F-Type) or PAL(DIN-Type) Video Input System NTSC, PAL, SECAM Input PC (P), PC(S) Display Mode Input/Output <42" diagonal> Vid
Troubleshooting Symptom No Power Cause Possible Solution Power to the TV is not Check source of power to the TV. plugged in. Unit will not respond to Sensor is blocked. Clear path for sensors. remote control Batteries in remote control Clean sensor lens. are weak. Replace batteries. Video source incorrect. Check video source connection. No signal is displayed Make sure TV is set to correct video source. Picture scrolls or is Antenna type or location fuzzy Change antenna.
FCC Compliance Statements NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates ,uses and can radiate radio frequency energy and ,if not installed and used in accordance with the instruction , may cause harmful interference to radio communication.
