Specifications

For F6000 Furnace

Model #

F6020C F6028C F6010 F6018

F6020C-33 F6028C-60 F6010-33

F6020C-33-60 F6028C-60-80

F6020C-33-60-80 F6028C-80

F6020C-33-80 F6038CM

F6020C-60 F6038CM-60

F6020C-60-80

F6020C-80

F630CM

F6030CM-33-60

F6030CM-60

Dimensions Overall Width 19.25 (48.9) 19.25 (48.9) 19.25 (48.9) 19.25 (48.9)

in. (cm) Height 21 (53.3) 21 (53.3) 21 (53.3) 21 (53.3)

Depth 20 (50.8) 20 (50.8) 20 (50.8) 20 (50.8)

Chamber Width 12.75 (32.4) 12.75 (32.4) 12.75 (32.4) 12.75 (32.4)

Height 6.75 (17.1) 6.75 (17.1) 6.75 (17.1) 6.75 (17.1)

Depth 10 (25.4) 10 (25.4) 10 (25.4) 10 (25.4)

Weight LBS. (kg) 96 (43.5) 96 (43.5) 96 (43.5) 96 (43.5)

Electrical Volts 220-240 208 220-240 208

Ratings Amps 18.3 19.2 12.9 11.2

Watts 4400 4000 3095 2325

Freq. 50/60 50/60 50/60 50/60

Phase 1 1 1 1

Oper. Temp.

Range °F(°C) 212-2192°F 212-2192°F 212-2192°F 212-2192°F

(100-1200°C) (100-1200°C) (100-1200°C) (100-1200°C)

*212-1787°F *212-1787°F

(*100-975°C) (*100-975°C)

Notes: The maximum ramp rates for this furnace for heat up are: 12°C (22°F) per min. from 25°C - 537°C

(75°F-1000°F), 10°C(18°F) per min. from 537°C-1093°C (1000°F-2000°F).

* (-60) coal-ashing furnaces

Environmental Conditions

Operating: 17°C - 27°C; 20% to 80% relative humidity, non-condensing. Installation Category II

(over-voltage) in accordance with IEC 664. Pollution Degree 2 in accordance with IEC 664.

Altitude limit: 2,000 meters.

Storage: -25°C to 65°C; 10% to 85% relative humidity.

General Specifications