Technical data

6.3 Operator Call FIP
Table 6–3 (Cont.) Operator Call Messages
Number
Message Description and Action
PC LOAD A4
PC LOAD B5
PC LOAD LETTER
PC LOAD LEGAL
PC LOAD EXEC
PC LOAD PAPER nn
This message
1
is displayed when the host system sends a
command to change the size of the installed cassette. Install
the requested size cassette and press
On Line
or
Error Skip
to continue.
nn is a user defined number in the range of 80–99 that is
transmitted from the host system.
Troubleshooting: Use the following procedure to isolate
the malfunction and fix the printer:
1. Inspect the condition of the size keys that are molded
into the cassette. See Table 1–5 for more information
on the cassette size keys.
2. Remove the cassette. Manually actuate and inspect the
operation of the size-sensing levers and switches.
3. Swap the feeder or the feeder control board.
4. Swap the DC control board.
OC nn...nn
(13 characters)
This is the operator comment text that is transmitted from
the host computer. To clear the message and continue, press
On Line
or
Error Skip
.
15 ENGINE TEST This message is displayed during the generation and
printing of the print engine internal test pattern, which
is initiated when you press the TEST PRINT button on the
DC control board.
1
This message is not displayed if the feeder option is not installed.
Control Panel Messages FIPs 6–11