Manualshelf

Technical data

ManualsBrandsDigital Equipment Corporation ManualsPrint & ScanDEClaser 1100 Series
161162163164165166167168169170
10.11 Separation Pad
10.11 Separation Pad
Use the following procedure to remove and replace the separation pad:
1. Open the front door and remove the EP-L cartridge, as shown in
Section 10.13.
2. Pull on the plastic tab to unsnap and loosen the separation pad from the
bulkhead of the printer chassis.
3. Remove the separation pad.
Caution: Do not touch the surface of the separation pad with your fingers.
Finger oil can contaminate the surface and decrease the service life of the
pad.
006064s
10–24 Removal and Replacement Procedures and RSL