Technical data

10.18 Interface Board

Use the following procedure to remove and replace the interface board:

Caution: Use the standard antistatic equipment and procedures when you

handle this sensitive electronic component.

1. Unscrew the two captive screws and open the rear panel.

006085s

Note: The illustration shows the interface board of the DEClaser 1100

printer. Although the interface board for the DEClaser 1152 printer is

different, its removal and replacement procedure is the same.

Caution: The interface boards for the DEClaser 1100 and DEClaser 1152

printers are not interchangeable. Installing the wrong board can damage

the printer.

Removal and Replacement Procedures and RSL 10–49