Technical data

10.20 Video Control Unit (VCU)
10.20.2 Optional RAM and Expansion Memory
Use the following procedure to remove and replace the optional RAM memory
and the expansion memory boards from the DEClaser 1100 printer:
Caution: Use the standard antistatic equipment and procedures when you
handle this sensitive electronic component.
1. Open the rear cover and remove the interface board, as shown in
Section 10.18.
2. Pull back firmly on the molded handle and remove the optional RAM
memory board. Place the board on a work surface.
006100s
10–64 Removal and Replacement Procedures and RSL