Technical data

10.23 Door Rod Assembly

Use the following procedure to remove and replace the door rod assembly:

1. Remove the following components:

a. EP-L cartridge, as shown in Section 10.13

b. Fixing unit, as shown in Section 10.15

c. Upper cover, as shown in Section 10.2

d. Right and left side covers, as shown in Section 10.3

Caution: This note affects replacement of the rod assembly only. Before

you replace the components, close the front door to align the hook with

the rack . Damage to the EP-L shutter hinge can result if the alignment is

not as shown.

006105s

10–70 Removal and Replacement Procedures and RSL