Technical data

1.4 Switches, Sensors, and Solenoids

Figure 1–7 shows the location of each switch, sensor, and solenoid in the

DEClaser 1100 series printer. See Section 9.2, Parts Locator, to ﬁnd the

locations of FRUs.

Figure 1–7 Switches, Sensors, and Solenoids

Switches: The HV door switch is a safety feature. See Section 1.11.

The following switches and designations are referred to in Figure 1–7 and on

the wiring diagrams in Section 1.8.

• SW901, SW902, and SW903, the cassette size-sensing switches, are

mounted on the cassette feeder board. (See Table 1–5.)

Physical and Functional Description 1–13