Technical data

2.16 Tray (Page Format) Size Menu

The Page Format Size menu sets the size of the printed image when tray

feeding is selected. The page format or tray image size is set by:

• Host-transmitted escape sequences

• Page Format menu

• Power-up default

When the power is turned off then on, any value previously selected by the

Page Format menu is lost and one of two power-up values are loaded. The

power-up default is selected through the paper value of the INITIAL Setup

menu. See Section 2.10.3 for more information.

Use the following procedure to change the tray image size from the Page

Format menu:

1. Press

online

to set the printer ofﬂine.

2. Press and hold

Feeder Select

until one of the following display messages

appears:

TRAY = LETTER

TRAY = LEGAL

TRAY = EXEC

TRAY = A4

3. Press

Feeder Select

to scroll through the above messages.

4. Press

online

when the desired value is displayed. No selection step is

necessary. The 00 READY DEC text is displayed and the page format size

is selected.

2–16 DEClaser 1100 Printer Control Panel