Technical data

3.3 Menu Descriptions
3.3.4 PAPER HANDLING Menu
Table 3–10 contains the values to use to set the paper handling features of the
printer. Default values are shown in uppercase in the ‘‘Values’’ column.
Table 3–10 PAPER HANDLING Menu
Menu Item Values Description
DEFAULT FEEDER FEED: CASSETTE
1
Selects the paper cassette to
automatically feed paper into the
printer.
FEED: front Selects the multipurpose tray.
FRONT PAGE SIZE The following values specify media
sizes for multipurpose tray feed
operation:
FRNT: LETTER Specifies letter size (8.5 in. x 11.0 in.)
FRNT: a4 Specifies A4 size (210 mm x 297 mm)
FRNT: legal Specifies legal size (8.5 in. x 14.0 in.)
FRNT: exec Specifies executive size (7.25 in. x 10.5
in.)
FRNT: a5
2
Specifies A5 size (148 mm x 210 mm)
FRNT: c5 Specifies C5 size (162 mm x 229 mm)
FRNT: dl Specifies DL size (C5/6) (110 mm x 220
mm)
FRNT: 4.125x9.5 Specifies 4.125 in. x 9.5 in.
FRNT: 3.875x7.5 Specifies 3.875 in. x 7.5 in.
FRNT: b5 Specifies B5 size (182 mm x 257 mm)
FRNT: halfletter Specifies half letter size (5.5 in. x 8.5
in.)
FRNT: 2/3 A4 Specifies two thirds A4 size (198 mm x
210 mm)
FRNT: 7x9 Specifies 7.0 in. x 9.0 in.
1
Cassette is the default feeder if it is installed. If the cassette is not installed, multipurpose tray is
the default feeder.
2
To prevent paper jams, use 90 g/m
2
(24 lb.) paper when A5 size paper is required.
(continued on next page)
DEClaser 1152 Printer Control Panel 3–19