Technical data

4.1 DEClaser 1100 Printer Test Print A
4.1 DEClaser 1100 Printer Test Print A
Figure 4–1 is an example of Test Print A. To print Test Print A, press and
release
Test/Font
briefly. TEST PRINT A is displayed during the printing
process.
Table 4–1 lists a brief description of each item in the TEST PRINT block.
Table 4–1 DEClaser 1100 Test Print Block
Version Line lists the current revision level of the printer firmware.
Total Ram Lists the amount of random-access memory (RAM) available in the
printer. Figure 4–1 shows there are 512 KB of RAM. This is the
minimum amount of memory and represents the internal stock
memory. This number increases by 1 or 2 Mbytes when you add a
memory expansion option.
Font Card Shows the number of installed font cartridges.
Free Ram Indicates the amount of unused or available dynamic RAM (DRAM)
space.
The Current Settings block shows:
• The selected value of each setup menu
• The area of memory where the values can be stored. For example,
( RAM + NVRAM ) means the current setting can be stored in RAM or
NVRAM. Chapter 2 explains the Setup menu settings.
4–2 DEClaser 1100 Printer Test Prints