Technical data

5.3 DEClaser 1152 Printer Cleaning Test Page

Figure 5–3 shows a Cleaning Test page.

The two-pass cleaning test cleans the ﬁxing unit rollers. Perform the cleaning

test when:

• Installing a new EP-L cartridge

• Staining occurs at the top or bottom of transparencies

• Paper frequently jams in the ﬁxing unit

Note: Always use plain white paper to generate the cleaning paper. It can be

A4-size, letter-size, or legal-size paper.

Use the following procedure to clean the ﬁxing assembly:

1. Be sure the printer is not printing and the display reads

PS READY/IDLE.

2. Press

On Line

• The On Line indicator shuts off.

• PS OFFLINE displays on the control panel.

3. Press and hold down

Test/Font

until the display reads CLEANING PAPER

and the LED lights on the Test/Font button.

• The cleaning paper prints.

4. Insert the printed cleaning paper into the paper tray with the printed side

facing up.

5. Press

Test/Font

to run the cleaning paper through the printer.

• The cleaning paper moves to the output tray, indicating that the ﬁxing

assembly is clean.

6. Press

On Line

• The On Line indicator lights.

• PS READY/IDLE displays on the control panel.

Discard the cleaning paper.

5–6 DEClaser 1152 Printer Test Prints