Technical data

Conventions Used in This Guide
The following conventions are used in this guide:
Convention Meaning
NOTE Notes provide important additional information.
CAUTION Cautions provide information to prevent damage to
equipment.
WARNING Warnings provide information to prevent personal injury.
Key
A key name is shown enclosed in a box to indicate that
key on the control panel. Key names are always shown in
initial capital letters. For example:
1. Press
On Lne
to place the printer on line.
Dash (—) A statement preceded by a dash describes the result of a
procedural step. For example:
1. Press
On Line
to place the printer on line.
— The On Line indicator lights.
Check Mark ( ) A statement marked by a check mark indicates a special
instruction related to the procedural step. For example:
1. Insert the paper into the tray until it stops.
The right edge of the paper should touch the paper
feed guide.
UPPERCASE Printer status messages and operator call messages are
shown in uppercase. For example:
— The display reads 00 READY.
Bold Items from the scrolling menus appear as they do on the
display (uppercase, lowercase, or initial capital letters)
with the menu item shown in bold type. For example:
1. Press
Menu
to enter Menu Mode.
— The menu display reads FONT/FEED LAYOUT.
xiii