Technical data

Table 1–2: Printer Components: Rear/Left-Side View
Component Function
1. Air Vent The cooling fan exhausts air through this vent. Be
sure that the printer has adequate space around it to
ensure proper ventilation.
2. Memory Board Access Cover Optional RAM (random-access memory) can be added
to the printer. This access cover allows you to install
the optional memory boards easily. Refer to the
instructions on the memory board packaging for the
installation procedure.
3. Power Cord Receptacle This is where the power cord is connected to the
printer.
4. Parallel (Centronics)
Interface Cable Connector
This connector is used when the interface cable from
the host computer is a parallel cable. Refer to the
DEClaser 1100 Printer Installation Guide for more
information about connecting your computer to the
printer.
5. Video Interface Connector This connector is used to connect an external video
controller to the printer. Input from an external
controller allows the DEClaser 1100 to print custom
graphic applications at maximum speed. Consult
your external video controller documentation for
interface information.
6. Serial (RS232C)
Interface Cable Connector
This connector is used when the interface cable from
the host computer is a serial cable. Refer to the
DEClaser 1100 Printer Installation Guide for more
information about connecting your computer to the
printer.
1–6 Operator’s Guide