Technical data

You should observe the following when you power on the printer:

— All control panel indicators light for a moment.

— The Ready indicator ﬂashes and the display reads

02 WARMING UP (assuming that the printer has cooled below

operating temperature before it is powered on).

— The Online and Ready indicators remain on and the display reads

00 READY DEC.

NOTE: The display reads 00 READY DEC only if you are using

Digital’s ANSI-Compliant Printing Protocol level 3. If you are

using an optional protocol such as PostScript or CaPSL, the display

shows the protocol being used. For instance, if you are using

PostScript protocol, the display reads PS READY/IDLE. Since

several protocols can be used with the DEClaser 1100 printer, the

remainder of this manual shows the ready message as 00 READY.

If the printer does not power on correctly, refer to Chapter 6 for

troubleshooting information.

2–2 Operator’s Guide