Technical data

2.13 Resetting the Printer
There are two methods of resetting the printer: You can perform a hard
reset by powering the printer off and then back on or you can perform a
soft reset by pressing
Reset
.
CAUTION: When performing a hard reset, always wait at least two seconds
before you power the printer back on.
Perform a soft reset of the printer under the following circumstances:
• When changing the paper feed input between tray and cassette
• When changing paper tray sizes (see Section 2.5)
• When changing paper cassette sizes
• To clear data in the print buffer
• To invoke features in the INITIAL menu (see Table 4–12)
• To enter and exit Control Representation Mode (see Section 2.12.1)
Use the procedure in Table 2–7 to perform a soft reset.
Table 2–7: Resetting the Printer
Operation Display Reads
1. Press
On Line
to place the
printer off line.
– The On Line indicator
goes off.
00 READY
2. Press and hold
Reset
for about
three seconds.
03 RESET
00 READY
3. Press
On Line
to place the
printer back on line.
– The On Line indicator
lights.
00 READY
2–36 Operator’s Guide