Manualshelf

Technical data

ManualsBrandsDigital Equipment Corporation ManualsComputer equipmentDigital Server 3220R Series
71727374757677787980
Troubleshooting
4-8
Obtaining Information Using the BIOS Setup Utility
You can use the BIOS Setup utility to check the Serial number, Revision number,
and Asset number for the main logic board and processor module configured in the
server. For example, if you change the main logic board or processor module in the
server, you must run the BIOS Setup utility to re-synchronize the System ID (server
model number and serial number) in the main logic board or processor module’s
memory. The BIOS Setup utility will check the new main logic board or processor
module and will then detect the System ID mismatch.
You can view the details for the main logic board or processor module by pressing
<F3> and then selecting the
SYS
option. The BIOS Setup utility lists the server
model number and server serial number information stored on the main logic board
or processor module. You can then confirm the correct model number and serial
number. This data is available on the label located on the server’s back panel.
Refer to Chapter 3, “BIOS Setup Utility Features,” for more detailed information about the
BIOS Setup utility.
DIGITAL ServerWORKS Manager
The DIGITAL Server is shipped with DIGITAL ServerWORKS Manager software.
ServerWORKS Manager is a workgroup and server management product for
DIGITAL’s family of servers. ServerWORKS Manager utilizes the Simple Network
Management Protocol (SNMP) environment to assist the Network or Server
administrator by constantly monitoring the network for problems.
DIGITAL ServerWORKS Manager is based on an open architecture that enables
seamless integration and interoperability with popular enterprise management
software packages such as Computer Associates’ POLYCENTER
Manager/NetView, Hewlett-Packard’s OpenView UX for Windows, and IBM’s
Netview/6200 AIX. Also included with the DIGITAL ServerWORKS Manager are
Network Operating System (NOS) Agents for Windows NT V4.x, Novell NetWare
V3.12 and V4.x, and SCO UNIX V5.x. The OS/2 NOS includes its own agent and
can also be managed from ServerWORKS Manager.