Technical data

Server Software and Utilities
2-17
SCSI Configuration Utility
Your DIGITAL Server comes with an onboard, dual channel SYMBIOS 896 SCSI
controller and a SCSI
Configuration utility. This utility, located within the server BIOS,
allows you to change SCSI controller settings without opening the server.
Use the SCSI Configuration Utility to:
•
Check global factory default settings for each SCSI channel and devices
connected to it.
•
Change factory default settings for individual SCSI devices.
•
Change the device boot order.
To start the SCSI Configuration utility:
Press [Ctrl] + [C] when the following message appears during the boot process:
Press Ctrl-C to start Symbios Configuration Utility…
This message stays on the screen for about five seconds. If you invoke the
Configuration utility, the Main Menu of the Symbios SCSI Configuration utility is
displayed.
Main Menu
Change Adapter Status
Num
Level Current Next-Boot Found
Quit
Port Irq---------Status-----------NVRAM
SYM53C896
SYM53C896
Additional Adapter Configuration
Display Mode = Verbose
Mono/Color
Language
9000 9 On On Yes
9400 9 On On Yes
Adapter Boot Order
Help
Figure 2-2. Typical BIOS Setup Utility Screen