User guide

The Grand Tour
Buttons
4 Strata CS Digital Telephone 02/06
Fixed Buttons
The fixed buttons are located on your dial pad and enable you to perform standard
functions quickly and easily.
Table 1 Fixed Button Definitions
Button Definitions
Cnf/Trn
(Conference/
Transfer)
Press to conference additional callers or transfer calls to another station or
external destination. Maximum number of conference parties depends on
system configuration (see your System Administrator for details). This ability is
supported for both internal and external calls, or any combination of the two.
Hold
Press once to hold internal or outside calls. The Call
LED flashes green at the internal hold rate.
To retrieve a call on hold: Press Call that is on hold.
If the held party hangs up, the call is released. The LED is turned Off and LCD
display cleared for the held party.
A different call can be held on each Call button on your phone.
While a call is on Hold, the Scroll button may be pressed to display the caller
name. Pressing the Page button displays the caller number.
Note Held calls can only be retrieved at the station that initially held the call or
at another DKT with a Secondary Extension Number of the original DKT.
See “Flexible Buttons” on page 5.
Mic
(Microphone)
Press to toggle the microphone On/Off while the speaker telephone is in use.
The LED indicates the status of the microphone.
Msg
(Message)
Used as a single key access to voice mail of the default-assigned user of the
DKT. When Msg is pressed, the DKT extension is already assumed and the
user is only prompted for his/her password.
Redial
The last number called is redialed. Caller must be off-hook to initiate. Pressing
Redial dials the last party called.
Spkr
(Speaker)
Press to toggle the speaker On/Off. The LED indicates the status of the
speaker. Provides speaker activation for calling and answering handsfree.
Vol
s
Volt
Press to adjust volume levels of the handset, speaker and ringer volume.
HOLD
AUG 21 TUE 9:36