User guide

Features
Speed Dial/BLF
Strata CS Digital Telephone 02/06 23
Speed Dial/BLF
³ While in an on-hook state, press Speed Dial (SD) (programmed feature button)
to speed dial a pre-programmed internal or external number or temporary user
interface digit string.
³ To set Speed Dial numbers
Note A button must already be programmed as a Speed Dial button before
programming a speed dial number using the phone.
³ Speed Dial numbers are defined in the client or admin Graphical User Interface
(GUI) screens under User/Phone settings. Each Speed Dial key can support one
speed dial internal or external number or telephony user interface digit string.
...or
Users can configure their Speed Dial settings using only their telephone buttons as
follows:
1. Press
Redial.
2. Press the
Speed Dial button you want to set. The LCD (if you have one) reads
“Enter Number.”
3. Enter the number to be speed dialed (including access code if it is an outside
number).
4. Press
Redial.
Note Any Speed Dial button programmed with an internal destination will also
show the busy status of that station if the BLF feature is turned on by the
System Administrator.