User guide

Features
Unassigned Buttons
24 Strata CS Digital Telephone 02/06
Unassigned Buttons
Pressing an unassigned feature or line button on a digital phone will now display the
button’s number so it is easier to assign features to buttons using the ViewPoint or
Administrator feature.
Volume Control
Your telephone has a volume increase and decrease button for controlling speaker and
handset volume levels.
You must hold down either button (
Vol s/Vol t) for at least 1/8 second for any
volume change to occur. If you continually hold down either button, the volume
continually changes about every half second until the level limit is reached.You hear
ring tone as long as you press a Volume button when your telephone is idle.
The method for changing feature volume varies. Some features can be adjusted using
only the
Vol s/Vol t and others require additional buttons.
³ To adjust the handset volume
³ During a call, press the
Vol s to increase volume and Vol t to decrease volume.
When you hang up, the volume returns to the default setting. This default setting
can be adjusted to higher/lower in system programming.
³ To adjust Ring Tone, incoming Handsfree Answerback, and Voice-first Answering
³ With the handset on-hook, the phone idle, the
Spkr depressed and the handset in
the cradle, press the
Vol s to increase volume and Vol t to decrease volume.