User`s guide

The BIOS Setup Program
3–13
Setting Admin. Password
To set the Admin. Password, move the highlighted cell to the Admin. Password field
and press <Enter>. The following dialogue box will appear:
Set Admin. Password
Enter new password: [ ]
Confirm new password: [ ]
1. Type in your password and press <Enter>. The password can be up to seven
alphanumeric characters. Symbols and other keys are ignored.
2. Type the password in a second time to confirm. Press <Enter>. The System
Password is now set.
Changing Admin. Password
To change the Admin. Password, move the highlighted cell to the Admin. Password
field and press <Enter>. When the Admin. Password dialogue box appears, enter the
new password. Enter it a second time to confirm. The new password is now set.
Deleting Admin. Password
To delete a previously set Admin. Password and disable the password feature:
1. Open the Admin. Password dialogue box.
2. With the cursor in the Enter new password field, press <Enter>.
3. The cursor will move to the Re-enter new password field. Press <Enter>
again.
4. When the Notice dialogue box appears notifying you that changes have been
saved, press <Enter> a third time. The password has been deleted.