Installation guide

cdp
cdp
Synopsis
Configure DSSI parameters.
cdp [-{a,i,n,o,u}] [-sn] [-sa allclass] [-su unitnum][dssi_device]
Description
The cdp command allows you to modify DSSI device parameters
from the console terminal without connecting to a node’s DUP
server. The parameters that are modified are the DUP task
parameters: NODENAME, ALLCLASS, and UNITNUM.
If you enter cdp without an option or target device, the system
displays parameters for all DSSI devices in the system.
Parameters
Parameter Description
dssi_device Name of the DSSI device or DSSI controller.
Only the parameters for this device or the
devices on this controller will be modified.
Flags
Flag Description
-a Sets device allocation class, ALLCLASS.
-i Selective interactive mode, for setting all
parameters.
-n Sets device node name, NODENAME (up to
16 characters).
-o Overrides warning messages.
-u Sets device unit number, UNITNUM.
-sa allclass Sets the allocation class (ALLCLASS) for
all DSSI devices in the system to the value
specified.
Console Commands 3–7