Installation guide

show
show
Synopsis
Display an environment variable value or other information.
show [envar] [{config,device,memory,pal,version}]
Description
Displays the current value (or setting) for an environment
variable that you specify.
Alternatively, displays other information about the system,
according to the parameters that you enter on the command
line. For example, you can display the system configuration by
entering show config .
Parameters
Parameter Description
envar Displays the value of the environment
variable specified. Refer to the list of
commonly used environment variables
described in the next table.
config Displays the current system configuration.
device Displays devices and controllers in the
system.
memory Displays the memory module configuration.
pal Displays the Privileged Architecture Library
code (PALcode) version.
version Displays the console program version.
Console Commands 3–21