Technical data
Installation
Step
One: Position the InfoTower.
Determining InfoTower Power Requirements
The
InfoTower cabinet uses a
standard
switch selectable 110/220
V,
50160
Hz,
ac power source.
To
protect
the
InfoTower
and
its
internal components, you
should
use
an approved surge
suppresser
between
the
power source
and
the
cabinet.
Step
Two:
Verify InfoTower Cabinet Components.
After you
have
selected a proper location for
the
InfoTower
cabinet
and
have
carefully unpacked
the
box contents, check
that
all components
have
been
included
in
the
shipment. Verify
that
the
number
and
types
of
SCSI
drives
mounted
in
the
cabinet correspond
to
the
order
number
and
types
of
drives
that
were ordered.
Ensure
that
the
accessories bag contains
the
following items:
•
Two
keys
• Four
rubber
feet
• One power cord
•
Two
extemal SCSI cables: BCS6H-03,
and
BCl9J-03
• One
terminator
• One
template
(guide showing how
to
position
the
feet)
• InfoTower Installation
a.nd
Operating Information
• RRD42 Disc Drive
Owner's
Manual,
• Four
or
seven CD ROM caddies
Installation
2-1