Technical data

Installation
Step
Three: Prepare for the Installation.
Step Three: Prepare for the Installation.
To prepare for the installation of the InfoTower cabinet, perform the following
steps:
1. Make sure that all users terminate their sessions on the InfoServer system.
If there are users on the system, then lock out any subsequent accesses
by entering the SET SERVER STATE SHUT command at the InfoServer
system console.
____________________ Ca~ion ___________________ _
Never install or remove SCSI drives if the power to either the
InfoTower cabinet or InfoServer system is on. Doing so can crash the
InfoServer system and cause damage to any attached devices, including
SCSI drives in the InfoTower cabinet.
2. Tum the power off on the InfoServer system.
3.
Tum the power off on any connected extemal devices.
4. Move the InfoTower cabinet into the desktop or tower (vertical) position.
__________________ Warning ____________ _
For the vertical installation of the lnfoTower, use an enclosure
mounting stand.
_______________ W8mung __________ _
Bei der vertikalen installation des InfoTowers, verwenden Sie einen
Stander fUr das Gehiuse.
_______________ Avenl~eM __________ _
Pour une installation veticale de I'InfoTower, utilisez un pied pour
soutenir Ie boitier.
200004 Installation