Manualshelf

Technical data

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorRRD42
21222324252627282930
Installation
Step Seven: Connect other External Devices.
Figure 2-6 Connecting External Devices
to
the InfoTower cabinets
To External
Device
To
InfoServer
System
LJ·02647·TIO
To
connect other external devices, perform
the
following steps:
1. Make sure
that
the SCSI addresses of
the
external devices
do
not
conflict
with
the
labeled addresses of the SCSI drives contained in the InfoTower
cabinet.
2. Remove
the
terminator from
the
SCSI
port
on the back of the InfoTower
cabinet
that
is
not
connected to the InfoServer system.
3.
Connect
the
SCSI cable attached to the first external device
in
the
chain
to
the SCSI port
on
the
InfoTower cabinet.
4.
Check.
other connections
in
the chain
to
ensure
the connections
are
secure
and
that
the
last
device
in
the chain
is
terminated.
2-14
Installation