Technical data

Adding Additional SCSI Drives
Configuring Drives
Table 3-1 (Cont.) Drive SwitcblJumper Settings
Device
Address 101 ID2 103
3 1
1
0
4
0
0 1
5 1 0 1
6 N/A
N/A
N/A
7
1
1
1
1 = OnIIn
0= Offi'Out
Insening Drives
With the power off to both the InfoServer system and InfoTower cabinet,
perform the following steps
to insert a drive into the InfoTower cabinet:
1. Check that the SCSI ID jumper/switches are set correctly.
2.
Mount the SCSI device into the drive mounting bracket as follows:
a. Position the SCSI device into the drive mounting bracket as shown in
Figure 3-1.
3-2 Adding Additional SCSI Drives