Technical data

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorRRD42

Figure

3-3

Driver

Frame

Lever

Adding

Additional

SCSI

Drives

Inserting

Drives

7.

Tum

the

power on for both

the

InfoServer system and

the

InfoTower.

Removing

Drives

_______________________

Note

______________________

_

Eject any removable media from

the

drive before performing

the

following procedures.

With

the power off to

both

the

InfoServer system

and

InfoTower cabinet,

perform

the

following steps to remove a drive from

the

InfoTower cabinet:

1.

Unlock

and

fully open

the

InfoTower cabinet front

door.

2.

To

release

and

remove the SCSI device, move

the

drive frame lever to

the

left (Figure 3-3).

3. Hold onto

the

lever

and

the

exterior

of

the

drive and gently pull

the

drive

out

of

the

InfoTower cabinet.

Adding Additional SCSI Drives

3-5