User`s guide

1.4 SW300 SCSI Buses
The six single-ended SCSI-2 buses run vertically and attach to four devices per
SCSI bus (IDs 0 through 3). The two HS array controllers device side, SCSI
initiator IDs are preset by slot location to IDs 6 and 7, as shown in Figure 1–8.
Figure 1–8 SW300 SCSI Buses
id 3
id 6
id 2
id 1
id 0
id 7
id 3
id 6
id 2
id 1
id 0
id 7
id 3
id 6
id 2
id 1
id 0
id 7
id 3
id 6
id 2
id 1
id 0
id 7
id 3
id 6
id 2
id 1
id 0
id 7
id 3
id 6
id 2
id 1
id 0
id 7
SHELF 4
SHELF 3
SHELF 2
SHELF 1
CONTROLLER
SLOT 6
CONTROLLER
SLOT 7
CXO-4315A-MC
PORT 1 PORT 2 PORT 3 PORT 4 PORT 5 PORT 6
Introduction to the SW300 Enclosure 1–13