Manualshelf

User`s guide

ManualsBrandsDigital Equipment Corporation ManualsHome building and DecorStorage Works
49505152535455565758
Figure 5–3 Removing a Dual Speed Blower (Cabinet Removed for Clarity)
CXO-4336A-MC
GUIDE
CONNECTOR
LOWER
MOUNTING TAB
(NOT SHOWN)
BLOWER
UPPER
MOUNTING
TAB
5.11 Installing a Dual Speed Blower
Use the following procedure to install a dual speed blower:
1. Orient the replacement blower so the connector and guide pin line up with
the blower opening on the rear panel.
2. Push the blower straight in, making sure the upper and lower mounting tabs
snap in place.
5–8 Removal and Installation Procedures